ALPAFLORE TS FMP Technical information
technical information sheet

ALPAFLORE TS FMP

Technical reference: Avis technique ALPAFLORE

Ref.: 1745001
  INTRODUCTION

ALPAFLORE TS FMP is a glass-fibre reinforced polymer (ALPA FC) modified bituminous membrane finished with a macro perforated film on its surface and a plain thermo-fusible film on its under surface.

Its minimum thickness is 2.7 mm.

  
  USAGE

ALPAFLORE TS FMP is used as the first, base, layer in a multi-layer torch applied waterproofing system for roof gardens, both traditional and extensive, multi-function terraces as well as for exposed roofing.

PRESENTATION

Rolls of 10 m2 (10 m x 1 m), with a nominal weight of 30 kg.

STORAGE

Rolls to be stored upright and away from heat.

  
 
COMPOSITION
Glass-fibre reinforcement ................................................ 50 gm/m2
ALPA FC binder.............................................................. 2800 gm/m2
Surface: macro perforated fusible film surface + sand......... 1000 gm/m2</td>
thermo fusible film under surface....................................... 10 gm/m2


CHARACTERISTICS

binder
Melting point (ring & ball) (NF EN 1427) ........................... 150° C
Penetration @ 25° C (NF EN 1426).................................. 40/10 mm
Cold bend 20 mmf mandrel, no cracking @...................... - 20° C

CHARACTERISTICS
finished product
Tensile strength (NF EN 12311-1) : length/width................. 250/150 N/5 cm
Elongation at break (NF EN 12311-1) : length/width............ 3/3 %
Cold bend 20 mm f mandrel, no cracking @...................... - 15° C
Free shrinkage................................................................ < 0.01 %
Slump resistance, vertical................................................ 120° C
 
  The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice.  
 

West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX

Tel: 01473 724056 - Fax 01473 723263

email sales@axterltd.co.uk

  16 April 2002