| technical information sheet |
ALPAFLORE VV ARTechnical reference: Avis technique ALPAFLORE |
Ref.: 1745011
|
||||||||||||||||||||||||||||||||||
| INTRODUCTION
ALPAFLORE VV AR is a polyester reinforced polymer (ALPA FC) modified bituminous membrane, with an anti-root additive, with a mineral surface and sand on its under surface. Its minimum thickness is 2.8 mm, and the selvedge width is 6 cm. |
||||||||||||||||||||||||||||||||||||
| USAGE
ALPAFLORE VV AR is used as the second or surface layer in a multi-layer membrane waterproofing system or as root protection on structural waterproofing systems for roof gardens, both traditional and extensive, multi-function terraces as well as for exposed roofing. PRESENTATION Rolls of 10 m2 (10 m x 1 m), with a nominal weight of 44 kg. STORAGE Rolls to be stored upright and away from heat. |
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
| The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice. | ||||||||||||||||||||||||||||||||||||
|
West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX Tel: 01473 724056 - Fax 01473 723263 email sales@axterltd.co.uk |
27 March 2003 |