technical information sheet

ARMA CPV

Technical reference: Avis technique FORCE

Ref.: 16500x1
  INTRODUCTION

ARMA CPV is a stabilised polyester reinforced polymer (SBS) modified bituminous membrane finished on its surface with coloured mineral granules and with a thermo-fusible film on its under surface.

The product is 3.5 mm thick and has an 80 mm wide selvedge.

  
  USAGE
  • Top layer for waterproofing construction details.

PRESENTATION

Rolls of 8 m2 (8 m x 1 m), with a nominal weight of 43.5 kg.

STORAGE

Rolls to be stored upright and away from heat.

  
 
COMPOSITION
Stabilised polyester reinforcement..................................... 120 gm/m2
Elastomeric (SBS) binder (impregnation and coating).......... 4,200 gm/m2
Surface: mineral slate granules (natural or coloured)........... 1100 gm/m2
Film under surface........................................................... 10 gm/m2


CHARACTERISTICS

binder
Melting point (ring & ball) NFT 66.008 .............................. 110° C
Penetration @ 25° C NFT 66.004 ..................................... 40/10 mm
Cold bend 20 mmf mandrel, no cracking @....................... - 15° C
Elongation at break.......................................................... 1000%

CHARACTERISTICS
finished product
Tensile strength (NFG 07.0010) : length/width ................... 400/350 N/5 cm
Elongation at break (NFG 07.001) : length/width................. 35/35 %
Cold bend 20 mm f mandrel, no cracking @...................... - 15° C
Free shrinkage................................................................ < 0.5 %
Slump resistance, vertical................................................ 100° C
 
  The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice.  
 

West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX

Tel: 01473 724056 - Fax 01473 723263

email sales@axterltd.co.uk

  15 February 2000