technical information sheet

EXCEL HR S
(ALPAL DÉCOR CPV)

Technical reference: Avis technique ALPAL (BBA Agrément Certificate)

Ref.: 1728***
  INTRODUCTION

EXCEL HR S is a stabilised polyester reinforced polymer modified, Alpa®-mix, waterproofing membrane. Its surface is finished in coloured mineral slate chippings or ceramic granules and its under surface is finished with a torchable plastic film. The selvedge is 8 cm wide.

Its thickness is 4 mm.

  
  USAGE

EXCEL HR S is used as a single layer waterproofing which can either be fully or partially bonded to the substrate. It can also be used as a cap sheet in a multi-layer waterproofing system. On slopes <1º an underlayer of EXCEL RENFORT should be laid

PRESENTATION

Rolls of 8 m2 (8 m x 1 m), with a nominal weight of 45 kg for mineral slates and 47 kg for ceramic granules.

STORAGE

Rolls to be stored upright and away from heat.

  
 
COMPOSITION
Stabilised polyester reinforcement................................... 170 gm/m2
Alpa®-mix binder (impregnation and coating).................... 4270 gm/m2
Surface: mineral/ceramic granules ................................. 1200/1500gm/m2
Surface: plastic film under surface................................... 10 gm/m2


CHARACTERISTICS

binder
Melting point (ring & ball) (BS EN 1427) .......................... 145° C
Penetration @ 25° C (BS EN 1426) ................................ 40/10 mm
Cold bend 20 mmf mandrel, no cracking @...................... - 20° C
Elongation at break........................................................ 1200%

CHARACTERISTICS
finished product
Tensile strength (BS EN 12311-1) : length/width................ 600/600 N/5 cm
Elongation at break (BS EN 12311-1) : length/width.......... 35/35 %
Cold bend 20 mm f mandrel, no cracking @..................... - 20° C
Free shrinkage (BS EN 1107-1)....................................... < 0.3 %
Resistance to static point load ....................................... L4
Resistance to dynamic load ........................................... D3
 
  The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice.  
 

West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX

Tel: 01473 724056 - Fax 01473 723263

email sales@axterltd.co.uk

 13 January 2004