| technical information sheet |
EXCELFLEXTechnical dossier EXCELFLEX |
|
||||||||||||||||||||||||||||||||||||||||
| INTRODUCTION
EXCELFLEX is a stabilised polyester reinforced polymer modified, Alpa®-mix, waterproofing membrane. Its surface is finished in coloured mineral slate chippings or ceramic granules and its under surface is finished with a torchable plastic film. The selvedge is 8 cm wide. Its minimum thickness is 3 mm. |
||||||||||||||||||||||||||||||||||||||||||
| USAGE
EXCELFLEX is used as a single ply mechanically fastened waterproofing membrane for use on inaccessible roofs. Its laps are sealed by torching or by hot air welding.
PRESENTATION Rolls of 10 m2 (10 m x 1 m), with a nominal weight of 45 kg STORAGE Rolls to be stored upright and away from heat. |
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice. | ||||||||||||||||||||||||||||||||||||||||||
|
West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX Tel: 01473 724056 - Fax 01473 723263 email sales@axterltd.co.uk |
28 October 2003
Cancels and replaces sheet of 27/1/97 |