| technical information sheet |
FORCE 4000 DALLETechnical reference: Avis technique FORCE |
Ref.: 1508002
|
||||||||||||||||||||||||||||||||||||||
| INTRODUCTION
FORCE 4000 DALLE is a stabilsed polyester reinforced polymer (SBS) modified bitumen membrane finished on both surfaces with a plastic film. Its thickness is 4 mm. |
||||||||||||||||||||||||||||||||||||||||
| USAGE
FORCE 4000 DALLE is used as a single layer waterproofing:
It is installed by torching. PRESENTATION Rolls of 10 m2 (10 m x 1 m), with a nominal weight of 47 kg. STORAGE Rolls to be stored upright and away from heat. |
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
| The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice. | ||||||||||||||||||||||||||||||||||||||||
|
West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX Tel: 01473 724056 - Fax 01473 723263 email sales@axterltd.co.uk |
15 June 1998 |