| technical information sheet |
FORCE 4000 S
Technical reference: Avis technique FORCE |
Ref.: 15280x1
|
| |
INTRODUCTION
FORCE 4000 S is polyester reinforced polymer (SBS) modified bituminous membrane finished on its surface with coloured mineral or ceramic granules.
The product is 4.0 mm thick and has an 80 mm wide selvedge.
|
|
| |
USAGE
- single, self-protected layer for waterproofing inaccessible roofs
- self-protected layer in a multi-layer waterproofing system
PRESENTATION
Rolls of 8 m2 (8 m x 1 m), with a nominal weight of 44 kg (mineral surface)
Rolls of 7 m2 (7 m x 1 m), with a nominal weight of 40 kg (ceramic surface).
STORAGE
Rolls to be stored upright and away from heat.
|
|
| |
| COMPOSITION |
|
| Stabilised polyester reinforcement................................... |
170 gm/m2 |
| Elastomeric (SBS) binder (impregnation and coating)........ |
4450 gm/m2 |
| Surface: mineral slate granules (natural or coloured)......... |
900 gm/m2 |
| ceramic granules (coloured)............................................ |
1100 gm/m2 |
| Film under surface......................................................... |
10 gm/m2
|
|
CHARACTERISTICS
|
|
|
binder
|
|
| Melting point (ring & ball) NFT 66.008 ............................. |
125°
C
|
| Penetration @ 25° C NFT 66.004.................................... |
40/10 mm |
| Cold bend 20 mmf mandrel, no cracking @........................ |
- 25°
C |
| Elongation at break........................................................ |
1500% |
CHARACTERISTICS |
|
| finished product |
|
| Tensile strength (NFG 07.0010) : length/width.................. |
600/6000 N/5 cm |
| Elongation at break (NFG 07.001) : length/width.......... |
30/30 % |
| Cold bend 20 mm f mandrel, no cracking @.................... |
- 20°
C |
| Free shrinkage.............................................................. |
< 0.3 % |
| Slump resistance, vertical.............................................. |
100°
C |
|
|
| |
The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice. |
|
| |

West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX
Tel: 01473 724056 - Fax 01473 723263
email sales@axterltd.co.uk
|
10 August 1999
Cancels and replaces issue of
30 July 1997
|