technical information sheet

AXTER FILTER

Technical reference: DTU 43 - 1

Ref.: 1926001
  INTRODUCTION

AXTER FILTER layer is a 1.7 mm thick non woven polyester scrim.

 
  USAGE

AXTER FILTER layer is used as filter on roof gardens and retaining walls to retain small particles of soil. It is also applied over AXTER DRAIN drainage boards and BAC CANALIS reservoir boards.

PRESENTATION

Rolls of 200 m2 (100 m x 2 m) with a nominal weight of 41 kg.

STORAGE

Rolls to be stored horizontally.

  
 
COMPOSITION
Polyester (BS EN 29 073/1) ............................................. 200 gm/m2


CHARACTERISTICS
Thickness ...................................................................... 2 mm
Tensile strength (BS EN 10 319) ...................................... 1.5 kN/m
Elongation at break ......................................................... > 60 %
Measure of porosity (BS EN 12 956) ................................. 91 μm
Permeability (BS EN 11 058) ........................................... 25 mm/s
 
  The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice.  
 

West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX

Tel: 01473 724056 - Fax 01473 723263

email sales@axterltd.co.uk

 12 January 2004

Cancels and replaces 04/08/97