| technical information sheet |
HYRANGER 40 FPTechnical reference: Avis technique HYRENE TS (HYRANGER TS) |
Ref.: 14090x5
|
||||||||||||||||||||||||||||||||||||||
| INTRODUCTION
HYRANGER 40 FP is a glass-fibre reinforced polymer (SBS) modified bituminous membrane finished on its upper surface with coloured mineral or ceramic granules and on its lower surface with thermo fusible plastic film. The nominal thickness is 2.5 mm and the selvedge is 60 mm wide. |
||||||||||||||||||||||||||||||||||||||||
| USAGE
HYRANGER 40 FP is used as
It is installed by torching. PRESENTATION Rolls of 10 m2 (10 m x 1 m), with a nominal weight of
STORAGE Rolls to be stored upright and away from heat. |
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
| The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice. | ||||||||||||||||||||||||||||||||||||||||
|
West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX Tel: 01473 724056 - Fax 01473 723263 email sales@axterltd.co.uk |
1 March 1999 |