HYRANGER 25/25 TS
(HYRENE 25/25 TS)
Technical reference: Avis technique HYRENE TS (HYRANGER)
Ref.: 1416001
HYRANGER 25/25 TS is a glass-fibre reinforced polymer (SBS) modified bituminous membrane finished on its upper surface with fine sand and with a plastic film under surface.
HYRANGER 25/25 TS is used as a vapour control layer on a concrete deck or as a base layer in a multi-layer waterproofing system. It is installed by the torching method.
PRESENTATION
Rolls of 10 m2 (10 m x 1 m), with a nominal weight of 33 kg.
STORAGE
Rolls to be stored upright and away from heat.
| COMPOSITION | |
| Stabilised polyester reinforcement.................................... | 50 gm/m2 |
| Elastomeric (SBS)binder................................................. | 2,860 gm/m2 |
| Surface: sand surface..................................................... | 325 gm/m2 |
| Thermo-fusible undersurface film...................................... | 10 gm/m2 |
|
|
|
|
binder |
|
| Melting point (ring & ball) (NFT 66.008) ........................... | 125° C |
| Penetration @ 25° C (NFT 66.004).................................. | 40/10 mm |
| Cold bend 20 mmf mandrel, no cracking @...................... | - 25° C |
| Elongation at break................. | 1500 % |
CHARACTERISTICS |
|
| finished product | |
| Tensile strength (NFG 07.0010) : length/width ................. | 250/150 N/5 cm |
| Elongation at break (NFG 07.001) : length/width ............ | 2/2 % |
| Cold bend 20 mm f mandrel, no cracking @...................... | - 20° C |
| Free shrinkage................................................................ | < 0.01 % |
| Slump resistance, vertical................................................ | 100° C |
West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX
Tel: 01473 724056 - Fax 01473 723263
email sales@axterltd.co.uk