technical information sheet

35 PY REINFORCEMENT STRIP

Technical reference: Avis technique HYRENE TS (HYRANGER TS)

Ref.: 1553001
  INTRODUCTION

35 PY REINFORCEMENT STRIP is a polyester reinforced polymer (SBS) modified bitumen membrane finished on its surface with a plastic film and sand on its under surface.

 
  USAGE

35 PY REINFORCEMENT STRIPS are used to reinforce upstand and perimeter details, pipes and other roof penetrations.

PRESENTATION

Rolls of 10 lm (10 m x 0.25 m), with a nominal weight of 11 kg.

STORAGE

Rolls to be stored upright and away from heat.

  
 
COMPOSITION
Polyester reinforcement..................................................... 150 gm/m2
Elastomeric (SBS) binder (impregnation and coating)........... 3,900 gm/m2
Surface: plastic film surface............................................... 10 gm/m2
Surface: fine sand under surface ....................................... 300 gm/m2


CHARACTERISTICS

binder
Melting point (ring & ball) NFT 66.008 ................................ 125° C
Penetration @ 25° C NFT 66.004 ..................................... 40/10 mm
Cold bend 20 mm f mandrel, no cracking @ ..................... - 25° C
Elongation at break 1500 %

CHARACTERISTICS
finished product
Cold bend 20 mm f mandrel, no cracking @....................... - 20° C
Free shrinkage................................................................. < 0.5 %
Slump resistance, vertical................................................. 100° C
 
  The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice.  
 

West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX

Tel: 01473 724056 - Fax 01473 723263

email sales@axterltd.co.uk

 12 January 2004

Cancels and replaces 04/08/97