technical information sheet

HYRANGER S
(HYRENE S)

Technical reference: Avis technique HYRENE TS (HYRANGER TS)

Ref.: 1408004
  INTRODUCTION

HYRANGER S is a glass-fibre reinforced polymer (SBS) modified bituminous membrane finished with fine sand on both surfaces.

Its minimum thickness is 2.35 mm. The longitudinal selvedge is 6 cm wide, indicated by a white line, with a second white line 16 cm from the edge to identify the product after laying.

 
  USAGE

HYRANGER S is a universal membrane for use in a multi-layer waterproofing system. It can also be used as the second layer under heavy protection.

PRESENTATION

Rolls of 15 m2 (15 m x 1 m), with a nominal weight of 43 kg.

STORAGE

Rolls to be stored upright and away from heat.

 
 
COMPOSITION
Stabilised polyester reinforcement.................................... 50 gm/m2
Elastomeric (SBS) binder................................................ 2,200 gm/m2
Surface: Sand surface..................................................... 300 gm/m2
Sand under surface......................................................... 300 gm/m2


CHARACTERISTICS

binder

Melting point (ring & ball) (NFT 66.008)............................. 125° C
Penetration @ 25° C (NFT 66.004)................................... 40/10 mm
Cold bend 20 mmf mandrel, no cracking @...................... - 25° C
Elongation at break................. 1500 %

CHARACTERISTICS
finished product
Tensile strength (NFG 07.0010) : length/width ................. 250/150 N/5 cm
Elongation at break (NFG 07.001) : length/width ............ 3/3 %
Cold bend 20 mm f mandrel, no cracking @...................... - 20° C
Free shrinkage................................................................ < 0.01 %
Slump resistance, vertical................................................ 100° C
 
  The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice.  
 

West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX

Tel: 01473 724056 - Fax 01473 723263

email sales@axterltd.co.uk

 28 January 2000

cancels and replaces

25 January 1999