| technical information sheet |
HYRANGER SPOT S3VTechnical reference: Avis technique HYRENE (HYRANGER) |
Ref.: 1754010
|
||||||||||||||||||||||||||||||||||
| INTRODUCTION
HYRANGER SPOT S3V is a self-adhesive/heat activated, stabilised polyester reinforced polymer (SBS) modified bituminous membrane finished with a macro perforated plastic film on the surface and a peel off film on its under surface. Nominal thickness is 3 mm. |
||||||||||||||||||||||||||||||||||||
| USAGE
HYRANGER SPOT S3V is used as the first layer in a multi-layer waterproofing system. The peel off release film must be removed before laying the membrane onto its support (insulation, deck, etc.) PRESENTATION Rolls of 10 m2 (10 m x 1 m), with a nominal weight of 38.5 kg. STORAGE Rolls to be stored upright and away from heat. |
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||
| The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice. | ||||||||||||||||||||||||||||||||||||
|
West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX Tel: 01473 724056 - Fax 01473 723263 email sales@axterltd.co.uk |
14 October 1997 |