technical information sheet

HYRANGER TS FMP Sanded
(HYRENE TS FMP Grésé)

Technical reference: Avis technique HYRENE TS (HYRANGER TS)

Ref.: 1405001
  INTRODUCTION

HYRANGER TS FMP is a glass-fibre reinforced polymer (SBS) modified bituminous membrane finished with a macro perforated film on its surface and with fine sand on its under surface.

Its minimum thickness is 2.65 mm. The longitudinal selvedge is 6 cm wide, indicated by a white line, with a second white line 16 cm from the edge to identify the product after laying.

  
  USAGE

HYRANGER TS FMP is used as the first layer in a multi-layer waterproofing system. It can be laid in hot bitumen with subsequent layers torched to it.

PRESENTATION

Rolls of 10 m2 (10 m x 1 m), with a nominal weight of 33 kg.

STORAGE

Rolls to be stored upright and away from heat.

  
 
COMPOSITION
Glass-fibre reinforcement................................................... 50 gm/m2
Elastomeric (SBS) binder.................................................. 3,100 gm/m2
Surface: macro perforated fusible film surface ..................... 100 gm/m2
fine sand under surface .................................................... 350 gm/m2


CHARACTERISTICS

binder
Melting point (ring & ball) NFT 66.008 ................................ 125° C
Penetration @ 25° C NFT 66.004 ..................................... 40/10 mm
Cold bend 20 mmf mandrel, no cracking @ ..................... - 25° C
Elongation at break 1500 %

CHARACTERISTICS
finished product
Tensile strength (NFG 07.0010) : length/width .................... 250/150 N/5 cm
Elongation at break (NFG 07.001) : length/width ................. 3/3 %
Cold bend 20 mmf mandrel, no cracking @....................... - 20° C
Free shrinkage................................................................. < 0.01 %
Slump resistance, vertical................................................. 100° C
 
  The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice.  
 

West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX

Tel: 01473 724056 - Fax 01473 723263

email sales@axterltd.co.uk

  2 February 2000

cancels and replaces

25 January 1999