| technical information sheet |
HYRANGER TS FMP
|
Ref.: 1405005
|
||||||||||||||||||||||||||||||||||||
| INTRODUCTION
HYRANGER TS FMP is a glass-fibre reinforced polymer (SBS) modified bituminous membrane finished with a macro perforated film on its surface and a plain film on its under surface. Its minimum thickness is 2.65 mm. The longitudinal selvedge is 6 cm wide, indicated by a white line, with a second white line 16 cm from the edge to identify the product after laying. |
||||||||||||||||||||||||||||||||||||||
| USAGE
HYRANGER TS FMP is used as the first layer in a multi-layer torch applied waterproofing system. PRESENTATION Rolls of 10 m2 (10 m x 1 m), with a nominal weight of 33 kg. STORAGE Rolls to be stored upright and away from heat. |
||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||
| The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice. | ||||||||||||||||||||||||||||||||||||||
|
West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX Tel: 01473 724056 - Fax 01473 723263 email sales@axterltd.co.uk |
2 February 2000 cancels and replaces 21 June 1999 |