| technical information sheet |
ROLLSTICK 4000 SATechnical reference: Installation Guide - ROLLSTICK |
Ref.: 1754610
|
||||||||||||||||||||||||||||||||||||
| INTRODUCTION
ROLLSTICK 4000 SA is a self adhesive/heat activated, polyester reinforced membrane with a peel-off film on both surfaces. The product is 3 mm thick. The ROLLSTICK procedure is protected by patents in all countries world wide. |
||||||||||||||||||||||||||||||||||||||
| USAGE
ROLLSTICK is used to install ceramic or similar tiles to timber and its derivatives or concrete or cementitious floors and on walls of similar construction including plasterboard. The peel-off films allow the membrane and the tiles to be fixed cold and then the tile surface heated to activate the adhesive, alternatively the surface can be heated prior to the application of the tiles.
PRESENTATION Rolls of 10 m2 (10 m x 1 m), with a nominal weight of 38.5 kg. STORAGE Rolls to be stored upright and away from heat. |
||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||
| The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice. | ||||||||||||||||||||||||||||||||||||||
|
West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX Tel: 01473 724056 - Fax 01473 723263 email sales@axterltd.co.uk |
3 February 1999 |