technical information sheet

THERMECRAN

Technical reference: Avis technique HYRENE TS (HYRANGER TS)

Ref.: 1763001
  INTRODUCTION

THERMECRAN is high strength glass-fibre reinforced oxidised bitumen perforated membrane with a polyester film under surface.

 
  USAGE
  • As a layer to provide partial adherence in torch on single or multi-layer waterproofing systems such as HYRANGER TS or EXCEL HR S
  • As a diffusion layer under a torched on vapour control layer

PRESENTATION

Rolls of 20 m2 (20 m x 1 m), with a nominal weight of 28 kg.

STORAGE

Rolls to be stored upright and away from heat.

  
 
COMPOSITION
Perforated high strength glass-fibre reinforcement ............... 70 gm/m2
Oxidised bitumen ............................................................ 1,000 gm/m2
Surface: Sand surface...................................................... 300 gm/m2
polyester film under surface .............................................. 10 gm/m2


CHARACTERISTICS

binder
Melting point (ring & ball) (NFT 66.008) ............................. 100° C
Penetration @ 25° C (NFT 66.004)..................................... 40/10 mm

CHARACTERISTICS
finished product
Tensile strength (NFG 07.0010) : length/width..................... 350/300 N/5 cm
Elongation at break (NFG 07.001) : length/width................. 2/2 %
Cold bend 20 mm f mandrel, no cracking @....................... 0° C
 
  The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice.  
 

West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX

Tel: 01473 724056 - Fax 01473 723263

email sales@axterltd.co.uk

 30 June 1997

cancels and replaces

2 July 1994