| technical information sheet |
TOPFIX FMP SandedTechnical reference: Avis technique TOPFIX and TOPFLAM |
Ref.: 1451002
|
||||||||||||||||||||||||||||||||||||
| INTRODUCTION
TOPFIX FMP Sanded is a composite polyester/glass reinforced polymer (SBS) modified bituminous membrane finished on its upper surface with a macro perforated plastic film and on its lower surface with fine sand. The surface is marked with two coloured lines at 5 cm and 12 cm from the selvedge to indicate the fixing line and the overlap respectively. |
||||||||||||||||||||||||||||||||||||||
| USAGE
TOPFIX FMP Sanded is used as the first or base layer in a multi-layer waterproofing system. It is installed by mechanical fastening along its selvedge.
PRESENTATION Rolls of 10 m2 (10 m x 1 m), with a nominal weight of 30 kg. STORAGE Rolls to be stored upright and away from heat. |
||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||
| The manufacturer reserves the right to modify, at any time, the characteristics of its products. The characteristics mentioned above are indicative only with tolerances in accordance with current standard practice. | ||||||||||||||||||||||||||||||||||||||
|
West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX Tel: 01473 724056 - Fax 01473 723263 email sales@axterltd.co.uk |
25 January 1999 |