Axter WILOTEKT®-PLUS

safe, secure, sustainable structural waterproofing
For more details please contact Axter directly

INTRODUCTION
WILOTEKT®-PLUS is a unique, second generation structural waterproofing hot melt system that has been successfully used on the mainland of Europe for many years. Manufactured by COLAS, WILOTEKT-PLUS comprises a tough, flexible, self-healing reinforced rubberised compound for use over concrete in protected membrane (inverted) constructions for roofing, podium decks, car parks, roof gardens, civil engineering, etc.
WILOTEKT-PLUS Hot Melt Structural Waterproofing System brochure
WILOTEKT-PLUS
AUTHORITY Document
WILOTEKT-PLUS has been awarded the first European Technical Approval conforming to ETAG 3 Liquid Applied Roof Waterproofing Kits, Part 5 'Kits based upon hot applied polymer modified bitumen' - number ETA-03/0049 and achieves the highest permissible durability rating under the ETAG of 25 years.
ETA-03/0049
DESCRIPTION
There are four elements to the WILOTEKT-PLUS system:
  • 4 mm thick polyester reinforced protection membrane
  • Rubberised compound
  • Woven glass-fibre reinforcing mesh
  • Surface conditioning primer
BENEFITS
Fully bonded application - Applied in a liquid coating the WILOTEKT rubberised compound bonds perfectly to the deck in one seamless monolithic application. There is no possibility of lap failure or of tracking beneath the membrane.

Self-healing - Whilst clean, dry and warm WILOTEKT rubberised compound will heal itself against minor damage

Elimination of screeds - WILOTEKT-PLUS can be laid on all slopes up to 5% (2.25°) meaning that considerable cost savings can be achieved by the elimination of costly screeds. WILOTEKT-PLUS is unaffected by standing water.

Installation - Apart from rolling out the mesh reinforcement the works proceeds in one easy application thus reducing application times when compared with multi-layer systems.

Phased construction/night joints - Previously laid material will soften sufficiently to form a complete monolithic bond when lapped with new material.

Crack resistance - The 4mm thick polymeric membrane used as the protection membrane means that there is no requirement to install additional material to bridge minor cracks and day joints.
PROJECTS SIZE .PDF
The Met Quarter, Liverpool, UK 5,000m2
Sony Centre, Berlin, Germany 20,000m2
 
Post Office Tower, Bonn, Germany 6,000m2
IKEA Car Park, Sindelfingen, Germany 12,000m2  
Car Park, Frankfurt-am-Main, Germany 10,000m2  
Cologne Arena, Cologne, Germany 40,000m2
Underground Car Park, Munich, Germany 25,000m2  
Underground Car Park, Munich, Germany 20,000m2  
IMAX Cinema Complex, Nurenberg, Germany 4,000m2  

Packaging and Covering rates

Product Packaging Coverage (approx.)
WILOTEKT surface conditioning primer 22 kg drums 70 m2/drum
WILOTEKT reinforcement mesh 50 m x 1 m rolls 45.5 m2/roll
WILOTEKT rubberised compound 26 kg pack 8.7 m2/pack
WILOTEKT protection membrane 7.5 m x 1 m rolls 6.81 m2/roll

Installation | Specifications

Website copyright ©2008 Axter (UK) Limited