Banner

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
Axter home page
Axter home page

WILOTEKT-PLUS (Multi-use)

UNIQUE SECOND GENERATION STRUCTURAL WATERPROOFING (HOT MELT) WITH THERMAL INSULATION ON REINFORCED CONCRETE ROOF DECK WITH LIFETIME PERFORMANCE FOR USE UNDER ALL TYPES OF PROTECTION

WILOTEKT-PLUS comprises a specially blended polymer modified hot melt compound with a 4 mm thick robust protection sheet enabling speedy installation. European Technical Approval ETA-03/0049 applies and NHBC approval for zero degree slope.
  • Applications
    Applications
  • Performance
    Performance
  • Roof deck
    Roof deck
  • Insulation
    Insulation
  • Surface options
    Surface options
  • Installation
    Installation

Applications


  • Fully bonded, self levelling seamless monolithic one operation application.
  • Phased construction possible.
  • Suitable for roofs of zero degree slope.
  • Suitable for use on new build or renovation projects.

Performance


  • A minimum 50 year design life expectancy (BS 8747), available with a 35 year PLATINUM guarantee, WILOTEKT-PLUS will protect buildings from the elements for the life of the building.
  • Self-healing of minor damage with exceptional crack bridging capability.
  • Fully bonded so no risk of water tracking beneath a membrane.
  • Excellent point loading characteristics.
  •

Indicative BRE Green Guide 2008 rating: D/C.
See the full details of the BRE Green Guide methodology. Note - The environmental rankings are based on Life Cycle Assessments using BRE's Environmental Profiles Methodology 2008 and refer to the complete system build up including structural elements, thermal insulation, waterproofing and protection.

Roof deck


  • Reinforced concrete laid in accordance with BS 8217:2005.
  • WILOTEKT-PLUS is approved for use on dead flat decks so there is no requirement for a screed-to-falls. If screeds are to be specified then they should be installed in accordance with BS 6229:2003 and be allowed to dry out before laying the WILOTEKT-PLUS system. Lytag based screeds must not be specified.

Insulation


  • Any thermal insulation approved for use on inverted roof waterproofing systems.
  • Suitable for laying under HYDROSHIELD EPS or HYTHERM XPS insulation and all finishes.

Surface options


  • Gravel or paving slabs on supports (pedestrian or parking).
  • Reinforced concrete.
  • Intensive green roofs.
  • Extensive green roofs.
  • Brick or block pavers.
  • Macadam.

Installation


  • Hot melt fully adhered system.
  • Thermal insulation loose laid with breather membrane rolled on top with sealed laps .
  • Installed by accredited Axtershield Installers.
  • Comprehensive long term guarantees covering product, system design and installation.
  • Requires minimal routine maintenance, see Axter’s recommended Maintenance Schedule.