Axter home page
Axter home page
Loading
Axter home page
Axter home page

Specification matrix

The tables below give a selection of typical flat and low slope, < 5° pitch, roof specifications using the more commonly used Axter products.

For sloping roofs >5° pitch or where alternative products are required consult Axter for advice on 01473 724056 or email [email protected]

 Limited access roofing

clear Supporting deck
clear Type of roof required
clear Axter system
clear

Concrete

(Including cementitous screeds)

clear

Warm roof

clear Single layer ECOLINE ADH ECOLINE ADH
clear HYRANGER 25/25 TS and
FORCE LINE 4.5 RE
Hyranger 25, Force Line
clear

Inverted roof

clear FORCE LINE 2 VV and
FORCE 3000 LINE RE
Force Line, Force 3000
clear

Timber

and timber derivatives
(plywood, OSB)

clear Warm roof
clear Single layer ECOLINE ADH ECOLINE ADH
clear FORCE LINE 2 VV and
FORCE LINE 4.5 RE
Force Line
clear

Profiled metal


clear Warm roof adhered membrane
clear HYRANGER SPOT ADH and
FORCE LINE 4.5 RE
Hyranger Spot, Force Line
clear Warm roof mechanically fixed
clear Single layer ECOLINE FM ECOLINE FM
clear

Existing roof renovation

(If stripping to deck then remove
existing waterproofing and insulation
and proceed as for new roof)

clear With added thermal insulation
clear Single layer ECOLINE ADH ECOLINE ADH/FM
clear FORCE LINE 3 VV and
FORCE LINE 4.5 RE
Force Line
clear with no added thermal insulation
clear ALPAL 3000 S Alpal 3000

 Accessible roofing

clear Supporting deck
clear Type of roof required
clear Axter system
clear

Green roof


clear Warm roof
clear Inverted roof
clear FORCE LINE 3 VV and
FORCE 3000 TRAFIC
Force Line, Force 3000 Trafic
clear HYRANGER 25/25 TS and
FORCE 3000 TRAFIC
Hyranger 25, Force 3000 Trafic
clear

Multi-use roofs

including trafficked areas

clear Inverted
clear HYRANGER 25/25 TS and
FORCE MB 40 PY 180
Hyranger 25, Force MB
01473 724056

Enquiries

Site © 2014 Axter Limited
Other content as credited