Warranties

Warranty

Where products are purchased through a third party such as a specialist roofing merchant Axter offers a joint liability warranty. Axter guarantees that in the event that water penetration has occurred or is likely to occur as a result of a manufacturing fault in one or more Axter products then Axter Ltd will, by repair or replacement, make good the waterproofing integrity of the roof structure. In addition the Installer guarantees his installation and workmanship in a similar manner. This means that if the failure was the result of installation or workmanship then the installer will make the necessary repair or renewal. Warranties are available for either 15 or 20 years depending upon the materials and specification installed.

Warranty Plus

Axter's higher performance membranes, when supplied by Axter through a third party such as a specialist roofing merchant and installed by an Axter Alliance Installer in accordance with current norms and standards, are covered by the Alliance Warranty-plus for either 15 or 20 years so long as the solvency insurance premium has been paid. In the event that water penetration has occurred or is likely to occur as a result of a manufacturing defect in the product, or a workmanship error then Axter Ltd will, by replacement or repair, make good the waterproofing integrity of the roof structure.

Durability

Developed with world-wide sales in mind Axter's reinforced bitumen membranes for roof waterproofing have been designed to meet the exacting demands of all climatic conditions and to provide building owners with tough long lasting roofing whatever the weather.
BS 8747:2007 Reinforced bitumen membranes (RBMs) for roofing – Guide to selection and specification states, Clause 4.9.6, "Most polymer-modified and polyester reinforced bitumen membranes are expected to have a service life in excess of 50 years".

Warranty

To give additional comfort to specifiers and building owners Axter offers a range of long term (10, 15 or 20 year) warranties. Full details and sample warranties are available from Axter but the basic details are as follows:-

ALLIANCE	Product	Design	Workmanship	Solvency required?	Term in years
WARRANTY	Yes	No	Yes	No	10
WARRANTY-PLUS	Yes	No	Yes	Yes	15 or 20

For more information about each warranty type please hover your mouse over the relevant warranty name in the ALLIANCE column. For further details please use the enquiry form.

Solvency is only available when the installation has been completed by an Axter Alliance Installer and the Solvency Premium paid.

Further information on the availability of longer term guarantees is available in the Architects' section of this website.

Your assurance:

01473 724056

Enquiries

Sitemap